Resistance to heavy loads. The battery pack shall be tested according to the regulations and shall not ignite or explode.
Resistance to thermal shock. The battery pack shall be tested according to the regulations and shall not ignite or explode.
Anti-overcharge. The battery module shall be tested according to the regulations and shall not ignite or explode.
Resistance to overdischarge. The battery module shall be tested according to the regulations and shall not ignite or explode.
Resistance to short circuit. The battery module shall be tested according to the regulations and shall not ignite or explode.
High temperature storage. The battery shall be tested according to the regulations and shall not leak, smoke, catch fire or explode.
Anti-heating. The battery module is tested according to the regulations. No part of the explosion battery penetrates the screen, and some or all of the batteries protrude from the screen.
Anti-puncture. The battery pack shall be tested according to the regulations and shall not ignite or explode.
Anti-extrusion. The battery module shall be tested according to the regulations and shall not ignite or explode.
Resistance to low pressure. The battery pack shall be tested in accordance with regulations and shall not leak, smoke, catch fire or explode.
Constant damp heat. After the battery pack is tested according to the regulations, its appearance shall be free from obvious deformation, rust, smoke or explosion, and its capacity shall not be less than 90% of the rated value.
Anti-vibration. The battery pack shall be tested according to the regulations, and its appearance shall be free from obvious damage, liquid leakage, smoke or explosion, and it can work normally.
Anti-collision. The battery pack shall be tested according to the regulations, and its appearance shall be free from obvious damage, liquid leakage, smoke or explosion, and it can work normally.
Temperature cycling. The battery pack shall be tested in accordance with the provisions of 6.6.15, which shall not leak, smoke, ignite or explode; the appearance of the battery pack shall be free of cracks, no loss of quality, and the capacity shall not be lower than 70% of the initial state.
Flame retardant properties. For battery packs with plastic casing and protective cover, the test shall be carried out in accordance with the provisions of 6.6.16. The outer casing shall comply with the provisions of Article 8.3.2 of the GB/T2408-2008, FH-1 (horizontal level) and 9.3.2 of FV-0 (vertical). Level) requirements.
Insulation resistance. For a battery pack with a metal case, the insulation resistance of the battery pack's metal and cathode housings is not less than 2 MW.

SPECIFICATIONS

MAIN KIT INCLUDES
1 x 48V100Ah LiFePO4 Battery
1 x 164S-50A PCM
1 x Plastic/Iron Battery Case
Normal Voltage		51.2V
Normal Capacity		100Ah
Battery Energy		5120Wh
Inner Resistance		< 60mΩ
Battery Cycle Life		2500 Times @100%DOD
		3500 Times @80%DOD
Cell Configuration		16S1P-3.2V 100Ah
Reference Battery Size		(342±1)(173±1)(212±1) mm
Reference Battery Weight		38kg
Charge Voltage		58.4V
Charge Mode		CC/CV
Normal Charge Current		<=20A
Normal Discharge Current		50A
Max. Continuous Output Current		50A
Max. Continuous Output Power		2400W
Passive Protection Function		Over charge protection; Over discharge protection; Over
		current protection, etc
Operation Temperature Range		Charge: 0'C---45'C
		Discharge : -20'C---60'C
Battery Storage Temperature		-20'C---25'C
Individual Cell Approval		CE, UL, RoHS, MSDS, UN38.3

INTERIOR AND EXTERIOR GALLERY

Product Tags:

24v golf cart battery

48v golf cart batteries

48v golf cart battery

Inquiry Cart 0