Lower cost of ownership than AGM lead-acid
Extremely low weight up to 6 times lower
Cycle life of 2-15 times higher
Built-in electronic Battery Management System
The battery can replace a lead-acid battery without complicated interfaces and software settings
Very low self-discharge that is 10 - 20 times lower
Can be charged very fast in 1-3 hours
Waterproof, corrision resistant
No service or maintenance needed

SPECIFICATIONS

Material	LFP Battery (LiFePO4)
Nominal Voltage	51.2V
Nominal Capacity	344Ah
Cell Assembly	Prismatic 3.2V 86Ah
	16 series with 4 parallel
Built-in (16S 150A BMS)	Over-charging & charging protection.
	Temperature control function.
	Short circuit protection.
	Balances the cells and ensures long cell life.
Charging	Charging Model	CC / CV
	Charging Current	0.5C @344Ah
	BMS Charging Cut-off Voltage	58.4V
	Cell Overcharge Protection Voltage	3.65V / Cell
Discharge	Continuous Discharge Current	1C @ 344Ah
	Peak Discharge Current	2C @ 344Ah 10 seconds
	BMS Discharge Cut-off Voltage	41.6V +/-1V
	Cell Over-discharge Protection Voltage	2.5V / Cell
Working Temperature	Charging Temperature Range	0~45°C
	Discharge Temperature Range	_20~60°C
Cycle Life	More than 2500 times (100% DOD)
Our certifications	ISO9001, UL 1642, CE, RoHS
Communication	CAN485(Optional)
Dimension	1000700460 mm
Additional weight/ Battery Weight	170KG/580 Kg
Application	Forklift, Electric Car
Warranty	15 Months
Part Included	1× 51.2V 344Ah Lithium Ion Battery
	1× 51.2V 70A Charger

INTERIOR AND EXTERIOR GALLERY

OTHER RELATED PRODUCT

WARNING

Replacement of battery shall be performed as per following order. If failed, it may cause fire and explosion. Remove cable from negative terminal first. Connect cable to negative terminal last.
When connect cable to battery, make sure not to get changed post of +and -. It may cause the damage of electronic components or fire.
When ueing the battery ,handle with care,sulfuric acid may cause blindness or severe burn.

CAUTION

When moving battery, be careful not to drop the battery , which is heavy, Do not shake the battery with handle, if there is the handle, It may cause the injury.
Do not shore the battery at the following places. High temperature and humidity. Being exposed to rain,snow, direct sunshine.

FAQ

1. How to maintain the battery?

The battery should be stored in clean, dry, ventilated, dark environment when not using, keep it after full charge, and recharge it every 3 months or 6 months.

2. If battery failed, what will be the indications?

3. How can you tell if a battery is good or bad?

You should first check the battery for defects such as a broken circuit, a short, or a broken container. If an outward problem is not apparent, then you will have to check the battery's capacity using known measuring techniques to ascertain the problem.

4. Why "zero voltage" might happen?

Zero voltage means there is a broken circuit. There could be several reasons for a zero voltage state.

Product Tags:

charging forklift batteries

heavy duty truck battery charger

Inquiry Cart 0